Thrustmaster T3PA-PRO Add-On Manual de usuario descargar pdf (Pagina 9)

8/17

Adjusting the pedal SPACING

- Using the included 2.5 mm Allen key (20), loosen and remove the 2 screws holding the metal

head (17) and its support (21) in place.

- Once this is done, select the position of your choice (to the left, in the center or to the right) and

then replace and re-tighten the screws.

Examples with the brake pedal:

Left position Center position (default) Right position

Number of possible spacing positions per pedal:

- 3 for the accelerator pedal

- 3 for the brake pedal

- 3 for the clutch pedal

Adjusting the pedal TILT

- Using the included 2.5 mm Allen key (20), loosen and remove the 2 screws holding the metal

head (17) and its support (21) in place.

- Once this is done, turn the plastic head support (21) 180°, and then replace and re-tighten the

screws.

Examples with the accelerator pedal:

Less tilted position More tilted position (default)

Number of possible tilt positions per pedal:

- 2 for the accelerator pedal

- 2 for the brake pedal

- 2 for the clutch pedal

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 204 205

Sin comentarios

Thrustmaster T3PA-PRO Add-On Manual de usuario Pagina 9